Filter
Top Products
EN
6
Unpacking the washing
machine
• Remove the base, corner protectors
and top cover.
3 Installation and assembly
Unblocking the washing
machine
• Remove the screws holding the
plastic covers to the back of the
washing machine.
• Loosen and remove the 3 blocking
screws.
• Cover the holes with the plastic
covers you have just removed.
C
Do not throw the blocking screws
away. You may need to move the
washing machine at a later date.
Connection to the mains
water supply
The water supply hose is inside the
drum:
• Connect the bent end of the hose to
the threaded inlet of the electrovalve
located at the rear of the washing
machine.