Filter
Top Products
4 American Dryer Corp. 113226-6
MAXIMUM CAPACITY (DRY WEIGHT) 75 lb
34.02 kg
TUMBLER DIAMETER 37”
93.98 cm
TUMBLER DEPTH 36”
91.44 cm
TUMBLER VOLUME 22.40 cu ft
634.30 L
TUMBLER/DRIVE MOTOR 1 hp*
0.75 kW
BLOWER/FAN MOTOR N / A
DOOR OPENING (DIAMETER) 31-3/8”
79.69 cm
DOOR SILL HEIGHT N / A
WATER CONNECTION 3/4”-11.5 NH
(North America)
3/4” B.S.P.T. (Outside North America)
DRYERS PER 20’/40’ CONTAINER 10 / 20
DRYERS PER 48’/53’ TRUCK 24 / 26
VOLTAGE AVAILABLE 120-575V 1,3ø 2,3,4w 50/60 Hz
APPROXIMATE NET WEIGHT 741 lb
336.11 kg
APPROXIMATE SHIPPING WEIGHT 793 lb
359.70 kg
AIRFLOW
60 Hz
1,000 cfm
28.32 cmm
50 Hz
833 cfm
23.60 cmm
HEAT INPUT 175,000 Btu/hr
44,099 kcal/hr
EXHAUST CONNECTION (DIAMETER) 8”
20.32 cm
COMPRESSED AIR CONNECTION N / A
COMPRESSED AIR VOLUME N / A
INLET PIPE CONNECTION 3/4” F.N.P.T.
3/4” B.S.P.T.
(CE and Australia Only)
VOLTAGE AVAILABLE 208-575V 3ø 3,4w 50/60 Hz
APPROXIMATE NET WEIGHT 741 lb
336.11 kg
APPROXIMATE SHIPPING WEIGHT 793 lb
359.70 kg
AIRFLOW
60 Hz
1,000 cfm
28.32 cmm
50 Hz
833 cfm
23.60 cmm
EXHAUST CONNECTION (DIAMETER) 8”
20.32 cm
COMPRESSED AIR CONNECTION N / A
COMPRESSED AIR VOLUME N / A
OVEN SIZE
kW Btu/hr
kcal/hr
30 102,400
25,800
VOLTAGE AVAILABLE 120-575V 1,3ø 2,3,4w 50/60 Hz
APPROXIMATE NET WEIGHT 836 lb
379.20 kg
APPROXIMATE SHIPPING WEIGHT 888 lb
402.79 kg
AIRFLOW
60 Hz
1,000 cfm
28.32 cmm
50 Hz
833 cfm
23.60 cmm
STEAM CONSUMPTION 239 lb/hr
108.41 kg/hr
OPERATING STEAM PRESSURE 125 psi max
8.62 bar
EXHAUST CONNECTION (DIAMETER) 8”
20.32 cm
COMPRESSED AIR CONNECTION 1/8” F.N.P.T.
COMPRESSED AIR VOLUME 0.75 cfh
0.02 cmh
BOILER HORSEPOWER (NORMAL LOAD) 7 Bhp
SUPPLY CONNECTION 1” F.N.P.T.
RETURN CONNECTION 1” F.N.P.T.
STEAM
GAS
ELECTRIC
Shaded areas are stated in metric equivalents 8/24/06
* All reversing dryers are supplied with two (2) 3-phase (3ø) motors standard: a 1 hp (0.75 kW) blower motor
and a 1/2 hp (0.37 kW) drive motor.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
SECTION II
SPECIFICATIONS/COMPONENT IDENTIFICATION
A. SPECIFICATIONS