Filter
Top Products
113226-6 www.amdry.com 45
Typical water supply
OPTIONAL MANUAL BYPASS
Provisions are made in the dryer’s F.S.S. for the installation of an optional manual bypass. Depending on the
model dryer, the connections for the manual bypass are made at the “T” or “three way” fitting located in the
outlet supply side of the water solenoid valve. The use and connections of this manual bypass are at the option
or discretion of the owner.
The water connection for the manual bypass is made to the “T” or “three way” fitting, which has a 3/8” F.P.T.
and a coupling must be used to provide the minimum 1/2” supply (feed) line.
If the rear area of the dryer, or the water supply is located in an area where it
will be exposed to cold/freezing
temperatures, provisions must be made to protect these water lines from freezing.