Filter
Top Products
450261-2 www.amdry.com 9
TUMBLER ALIGNMENT:
Proper alignment is achieved by making the gap
between the tumbler and openings in the front and
rear bulkheads equal on all sides.
The gap may be checked for accuracy by using a
thickness gauge.
Adjust the tumbler position by loosening the three
bolts and forcing the wheel assembly toward the
center of the dryer to raise the tumbler and to move
it away from the side. A large screwdriver can
provide the necessary leverage.
Adjustment of the front of the tumbler is made the
same as the rear. The gap on the top, bottom, left
and right are to be made equal by moving the wheel
assemblies.
Below, both wheel assemblies must be moved
inward in order to move the tumbler straight upward.
EXAMPLES:
Below, both wheel assemblies must be moved to
the right in order to move the tumbler right. The left
wheel assembly must move a little more than the
right in order to lift the tumbler.