Filter
Top Products
8 American Dryer Corp. 450261-2
TUMBLER SUPPORT
WHEEL ASSEMBLY REPLACEMENT:
The front wheel assemblies can be replaced with
the lower front panel removed. Remove the three
bolts by reaching upward with a socket or box
wrench. The illustration on the right is provided to
show the location of these wheels as the wheels
cannot easily be seen while standing in front of the
dryer.
The left rear wheel assembly can be removed with
just the back guard removed. The rear right wheel
requires removing the back guard, heat duct, and
oven.
All wheel assemblies are mounted on slots to allow
for alignment of the tumbler. After one or more wheel
assemblies are replaced, the tumbler must be
realigned.