Filter
Top Products
43
1. Fault in main door switch circuit...
a. Failed main door switch.
b. Main door switch is out of adjustment.
c. Loose connection in the door switch circuit.
2. Fault in lint drawer switch circuit...
a. Lint drawer switch is out of proper adjustment.
b. Loose connection in the lint drawer switch circuit.
I. Microprocessor controller (computer) light emitting diode (L.E.D.) display reads “dSFL”...
1. Fault in microprocessor heat sensing circuit...
a. Blown 1/8-amp (“dSFL”) fuse on microprocessor controller (computer).
b. Failed microprocessor temperature sensor.
c. Failed microprocessor controller (computer).
d. Broken wire or connection somewhere between the microprocessor controller (computer) and the
microprocessor temperature sensor.
J. Microprocessor controller (computer) display reads “door”...
1. Fault (open circuit) in main door or lint drawer switch circuit...
a. Lint drawer is not closed ALL the way.
b. Lint drawer switch is out of proper adjustment.
c. Failed lint drawer switch.
d. Failed main door switch.
e. Broken connection/wire in main door or lint drawer circuit.
f. Failed 24 VAC transformer.
K. Microprocessor controller (computer) will not accept any keyboard (touch pad) entries, i.e.,
L.E.D. display reads “FILL” and when keyboard (touch pad) entries are selected, the display
continues to read “FILL”...
1. Failed keyboard (touch pad) label assembly.