Filter
Top Products
50
3. Low and/or inconsistent gas pressure (for GAS MODELS ONLY).
4. Insufficient make-up air.
5. Poor air/ gas mixture at burner...yellow or poor flame pattern; adjust gas burner air adjustment shutters
(for GAS MODELS ONLY).
6. Lint screen not being cleaned on a regular basis or often enough.
7. Extractors (washers) not performing properly.
8. Sail switch is fluttering...restriction in exhaust (for GAS MODELS ONLY).
9. Failed microprocessor controller (computer)...temperature calibration is inaccurate.
10. Failed microprocessor temperature sensor...calibration is inaccurate.
11. Steam damper system not functioning properly (for STEAM MODELS ONLY) ...
a. Damper sticking closed.
b. Leak in pneumatic (air) system.
12. Failed electric oven element(s) (for ELECTRIC MODELS ONLY).
R. Condensation on main door glass...
1. Too long, undersized, or improperly installed duct work.
2. Back draft damper is sticking in partially closed position.
S. Dryer or scraping noise at basket (tumbler) area...
1. Check for object caught in basket (tumbler)/wrapper area.
2. Basket (tumbler) is out of proper alignment ...
a. Check both vertical and lateral alignment.
b. Check gap between front panel and basket (tumbler) front...set screws may have come loose, and
basket (tumbler) walked forward or backwards.
3. Loose basket (tumbler) tie rod.
4. Failed basket (tumbler) support.
T. Excessive noise and/or vibration...
1. Dryer not leveled properly.