Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming
F232168
8
Programming Cycle Segments
The machine is preprogrammed with eight wash cycle
formulas that can be edited.
To edit any of these cycles, enter Program Mode. In
Program Mode, cycles are selected by number
(1 through 8) as opposed to the Run Mode, where
cycles are selected by pressing one of the eight
corresponding keys. The keys must serve different
functions in each mode because there are more
functions than keys in Program Mode.
In Run Mode the top left key selects Cycle 1, the key
directly below it selects Cycle 2, etc. Figure 1 shows
which key selects each cycle in Run Mode.
After entering Program Mode, display will show a
temperature. Press the (∧) key to enter Cycle
Programming Mode. The display will reference cycles
by number. Cycle 1 will show first. Use the (∧) or (∨)
key to select cycle to be edited. Press START key to
move into the following menu of options (starting at
Table 1).
NOTE: While cycle is running, pressing the START
keypad shows the temperature. Pressing the
START keypad again returns display to time
remaining or displays temperature for several
seconds, depending on version software.
Figure 1
PHM538R
1 Cycle 1 11 Door Open LED
2 Cycle 2 12 Spin Cycle LED
3 Cycle 3 13 Rinse Cycle LED
4 Cycle 4/Up Edit 14 Add Bleach LED
5 Cycle 5 15 Wash Cycle LED
6 Cycle 6 16 Out-of-Balance Indicator Dot
7 Cycle 7 (Variable-speed only)
8 Cycle 8/Down Edit 17 High Water Level Indicator Dot
9 START Keypad 18 Medium Water Level Indicator Dot
10 CLEAN FILTER Indicator LED
(Active only for C80 models)
19 Low Water Level Indicator Dot
PHM538R
NORMAL
LIGHT SOIL
UNIFORMS
HEAVY SOIL
STAINED
DELICATE
HOT
HOT
HOT HOT
HOT
HOT
WARM
COLD
START
PERM PRESS
VISA
TM
60C 60C
40C 40C
95C 95C
<
<
30C
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
1
5
6
7
8
4
10
2
16
17
18 19
3
9
11
12
13
14
15
1
4
10
2
16
17
18
19
3
9
11
12
13
14
15
DOMESTIC MODELS
INTERNATIONAL MODELS
5
6
8
7