Alliance Laundry Systems UF50PV Washer User Manual


 
Installation
10
F232058
Machine Overview (Continued)
The doorbox contains the Hall-effect door-
closed sensor, door-open sensor, and the
door-unlock solenoid.
Electromechanical valves control water flow
into the washer-extractor.
Emergency Stop Button
A red emergency stop button is located on the
right side of the machine front. Push the button
to stop the machine.
Wet Clean Features
The washer-extractor is equipped with the
following wet clean capable features: One-half
wash speed allows gentle mechanical action
during wash. Eight supply signals provide not
only normal laundering signals to dispense
detergents, bleaches, softeners, sours, etc., but
also chemicals unique to wet clean processing.
Delivery Inspection
Upon delivery, visually inspect crate,
protective cover, and unit for any visible
shipping damage. If the crate, protective
cover, or unit are damaged or signs of possible
damage are evident, have the carrier note the
condition on the shipping papers before the
shipping receipt is signed, or advise the carrier
of the condition as soon as it is discovered.
Remove the crate and protective cover as soon
after delivery as possible. If any damage is
discovered upon removal of the crate and/or
protective cover, advise the carrier and file a
written claim immediately.
Customer Service
If literature or replacement parts are required,
contact the source from whom the machine
was purchased or contact Alliance Laundry
Systems at (920) 748-3950 for the name of the
nearest authorized parts distributor.
For technical assistance, call any of the
following numbers:
(850) 718-1035
(850) 718-1026
Marianna, Florida
(920) 748-3121
Ripon, Wisconsin
A record of each machine is on file with the
manufacturer. The serial number decal is
located at the rear of the machine. Figure 1
shows the location of the serial number on the
decal. Always provide the machine’s serial
number and model number when ordering
parts or when seeking technical assistance.