Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation Instructions
19
M412060
If the gas service is not the same as that specified, DO
NOT CONNECT THE GAS LINE TO THE
TUMBLER! It will first be necessary to convert the
gas burner orifices.
IMPORTANT: Any product revisions or
conversions must be made by the Manufacturer’s
Authorized Dealers, Distributors or local service
personnel.
Purge air and sediment from the gas service line before
connecting it loosely to the tumbler. Purge remaining
air until odor of gas is detected, then tighten
connection. Use pipe compound, resistant to actions of
L.P. gas, on all pipe threads.
To reduce the risk of fire or explosion:
• The tumbler and its individual shut-off
valve must be disconnected from the gas
supply piping system during any
pressure testing of that system at test
pressures in excess of 1/2 psig (3.45
kPa).
• The tumbler must be isolated from the
gas supply piping system by closing its
individual manual shut-off valve during
any pressure testing of the gas supply
piping system at test pressure equal to or
less than 1/2 psig (3.45 kPa).
W648
WARNING
Check all pipe connections, internal and
external, for gas leaks using a soapy
solution. To reduce the risk of explosion or
fire, DO NOT USE AN OPEN FLAME TO
CHECK FOR LEAKS! Gas connections
should be checked annually for leakage.
W649
WARNING