Filter
Top Products
13
Operation
F232061
Keypad
Operation of the V-computer control is
performed with a 4-key touch keypad and LED
display located on the front of the machine.
See Figure 3.
Figure 3
The following table describes the function of
the individual keys when the machine is in
RUN mode.
Medium Water
Level
High Water
Level
Out-of-Balance
Condition
Low
Water
Level
Keypad
Key Description
Up
Used in cycle selection; pressing this key
moves among cycles from smaller to greater.
Down
Used in cycle selection; pressing this key
moves among cycles from greater to smaller.
Start
Used to start a cycle.
Stop
This key is not active in normal RUN mode.
In RUN mode, it is used only for stopping the
test cycle.