Filter
Top Products
Maintenance
F232219
20
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Care of Stainless Steel
● Remove dirt and grease with detergent and water.
Thoroughly rinse and dry after washing.
● Avoid contact with dissimilar metals to prevent
galvanic corrosion when salty or acidic solutions
are present.
● Do not allow salty or acidic solutions to
evaporate and dry on stainless steel. Wipe clean
of any residues.
● Do not leave sanitizers or sterilizing solutions on
stainless steel equipment for prolonged periods
of time.
● When an external chemical supply is used, ensure
no siphoning of chemicals occurs when the
washer-extractor is not in use. Highly
concentrated chemicals can cause severe damage
to stainless steel and other components with the
machine. Damage of this kind is not covered by
the manufacturer’s warranty. Locate the pump
below the washer-extractor’s injection point to
prevent siphoning of chemicals into the machine.
● If the stainless steel appears to be rusting, the
source of the rust may actually be a foreign piece
of iron or steel part not made of stainless steel,
such as a nail or screw contacting the stainless
steel surface. Tip: Paint all carbon steel parts with
a heavy protective coating. Stainless steel
fasteners should be used whenever possible.