Filter
Top Products
Maintenance
19
F232219
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
3. Remove back panel and check overflow hose and
drain hose for leaks.
4. Unlock the hinged lid and check the supply
dispenser hoses and hose connections.
5. Clean inlet hose filter screens:
a. Turn water off and allow valve to cool, if
necessary.
b. Unscrew inlet hose and remove filter screen.
c. Clean with soapy water and reinstall. Replace
if worn or damaged.
6. Tighten motor mounting bolt locknuts and
bearing bolt locknuts, if necessary.
7. Use compressed air to clean lint from motor.
8. Clean interior of machine, both basket and shell,
by wiping with a water-soaked sponge or cloth.
9. Use compressed air to ensure that all electrical
components are free of moisture and dust.
10. For variable-speed models only, clean AC drive
cooling fan blades monthly (more often if
required by the condition of the air).
a. Open the top cover and remove the control
module cover.
b. Gently wipe the fan blades clean with a dry
cloth.
Quarterly
NOTE: Disconnect power to the machine before
performing the quarterly maintenance procedures.
1. Tighten door hinges and fasteners, if necessary.
2. Tighten anchor bolts, if necessary.
3. Verify that the drain motor shield is in place and
secure, if so equipped.
4. Check all painted surfaces for exposed metal.
(Matching paint is available from the
manufacturer.)
● If bare metal is showing, paint with primer or
solvent-based paint.
● If rust appears, remove it with sandpaper or by
chemical means.
Then paint with primer or solvent-based paint.
5. Clean customer-supplied steam filter, where
applicable. Refer to Figure 12.
a. Turn off steam supply and allow time for the
valve to cool.
b. Unscrew cap.
c. Remove element and clean.
d. Replace element and cap.
Figure 12
H042I
1 Cap
2 Filter Element
H042
I
1
2