Filter
Top Products
Maintenance
F232219
18
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Figure 11
2. For 80 pound capacity models only, lubricate
bearings and seals each month OR after every
200 hours of operation. Refer to Figure 11.
a. Use a premium-grade lithium-based #2
grease. Never mix two types of grease, such
as petroleum and silicone.
b. Pump the grease gun slowly, permitting only
the following number of strokes:
● Bearing grease fitting, 2 strokes
● Seal grease fitting, 1 stroke
Do not pump the grease gun until grease
comes out of the bearing housing. This can
result in overlubrication, causing damage to
bearings and seals.
H047I
1 Bearing Grease Fitting
2 Seal Grease Fitting
H047I
1
2