AEG W 1230 Washer/Dryer User Manual


 
Installation and connection instructions
39
Installation of the appliance
3
Washing machines with curved panels are not suitable for installing
under units.
Transporting the appliance
Do not place the washing machine on its front or on its right side
(viewed from the front). Otherwise, electrical components can get
wet.
Never transport the unit without the transport safeguard. Do not re-
move the transport safeguard until the appliance is at the installation
location. Transporting the unit without the transport safeguard can
damage it.
Lift the appliance neither by an open filling door nor by the base.
When transporting the unit with a sack trolley: Attach the sack trol-
ley only at the side.
Remove transport packaging
Important! It is essential to re-
move the transport packaging be-
fore putting the appliance into
operation. Keep all parts of the
transport packaging in a safe
place for future use.
0 1. Open both hose holders on the
appliance's rear side and remove
the hoses and mains cable.
2. Pull both hose holders off the ap-
pliance with a strong pull.