Filter
Top Products
Operating instructions
37
4. If you want to check and see if wash-water cooling has been selected:
– Turn the program selector to F (SHORT SPIN).
– Press the k (PRE WASH) button briefly.
If l flashes on the program progress display, the water cooling func-
tion is enabled.
Delete wash-water cooling:
0 1. Turn the program selector to F (SHORT SPIN).
2. Press the k (PRE WASH) button for at least 5 seconds.
As soon as the button is pressed l flashes on the program progress
display. After 5 seconds l ceases to flash and illuminates continu-
ously for 5 seconds.
3. Whilst l is continuously illuminated, release the k (PRE WASH) but-
ton.
Once l has ceased to illuminate, the water cooling function is disa-
bled.
Additional rinse and water cooling
The additional rinse and water cooling functions can be combined.
Enable as under “Additional Rinse” and “Water Cooling”.