Filter
Top Products
Operating instructions
17
Execute a washing cycle
Brief instructions
A washing cycle proceeds in the following steps:
0 1. Set the correct washing program:
– select the program and the temperature with the program selector
– select additional program(s) if required
2. If necessary change the spin speed/o select (RINSE STOP).
3. Set
] (DELAY TIMER) if necessary.
4. Open fill-in door, insert washing.
5. Close the fill-in door.
6. Add detergent/conditioner.
7. Start washing program.
After the washing program runs out:
Attention! If the washing cycle is completed at the end of a rinse, run
a C (PUMP OUT), D (SPIN) or F (SHORT SPIN) cycle before opening the
fill-in door.
8. Open the fill-in door and remove the washing.
9. Switch off the washing machine: set program selector to I (OFF).
Set the washing program
3
See "Program Tables" for suitable program, correct temperature and
possible additional programs for various types of washing.
0 1. Set program selector to the
desired program with the desired
temperature.
The anticipated duration of the
selected program appears in the
multi-display in minutes.