Filter
Top Products
Operating instructions
21
Start washing program
0 1. Check whether the water tap is opened.
2. Start washing program:
Press O/s (START/PAUSE) button.
The washing program is started or starts at the end
of the delay time set.
3
If the K/W (DOOR/LIGHT) indicator flashes red when the
O/s (START/PAUSE) button is pressed, the door is not properly closed.
Close the door firmly and press the O/s (START/PAUSE) button again.
If a delay time has been selected:
The selected delay time runs, and the time remaining until program
start (in full hours) appears in the multi-display. During this time, wash-
ing can be added or delay time can be changed or deleted.
• Add washing: press the O/s (START/PAUSE) button, the door can be
opened. Then close the door and press the O/s (START/PAUSE) but-
ton again.
• Change or cancel the time delay: keep pressing the b (DELAY TIMER)
button until the desired time is displayed; when the program dura-
tion is displayed (such as 110 ), the washing program starts without
delay.