Filter
Top Products
User information
33
Leveling
Precise leveling will prevent vibrations, noise and movements of the
washing machine during operation.
Make the washing machine level by adjusting
the leveling screw that is too short.
Unscrew the stand and locking collar assembly
(lift the washing machine if necessary).
When the washing machine is stable, maintain
the stand on the ground and turn the locking
collar as far as posible.
Water inlet
Screw the supply pipe connector onto the
water inlet tap (20x27 mm), remembering to
use the washer provided with the washing
machine. Open the water inlet tap.
Drain
The drain siphon must be placed inside a drain
pipe (or in a washbasin) at a height of between
70 and 100 cm. Make sure that it cannot fall.
•Important: the drain pipe must never be pro-
longed. If it is too short, call a professional.