Filter
Top Products
User information
20
- To load some laundry : press the START/PAUSE button, the DOOR
relevant light illuminates, you can then open the lid. Close the lid and
press again the START/PAUSE button.
- To modify or to cancel the delay start : press the DELAY START button
by selecting the right led.
Programme progress
Before pressing the START/PAUSE button, the programme progress
displays the different steps of the chosen programme. During the wash
programme, the light corresponding to the phase in progress
illuminates.
Interrupting a programme in progress
The wash programme starts again when it had been interrupted. A
modification of the programme is not possible even during the pause.
End of programme
The appliance is equipped with a security which prevents the opening
of the lid during the cycle. When the DOOR light illumintates, you can
open the lid.
The programmes end :
• by a spinning (for all washing programmes) if you have not selec-
ted the option RINSE HOLD
• by a rinse hold (for all washing programmes) if you have selected
the option RINSE HOLD. You can then end these programmes by a
spinning or by a draining by setting the programme selector on the
chosen programme by the OFF position, then pushing the START/
PAUSE pushbutton.
At the end of the cycle, place the programme selector on the OFF
position in order to switch off the appliance.
Remove the laundry. Unplug the appliance and switch off the water
inlet tap.
Check that the drum is empty : any garments left in the appliance may
be damaged during the next wash (shrinkage) or their colour may run
onto other garments.
Note : leave the lid opened in order to air the washing machine.