Filter
Top Products
User information
19
function enables also to cancel a programme and to restart the
washing machine in case of error. If the programme selector is turned
when the appliance is performing wash cycle, the programme will be
carried out and will ignore the new position of the selector. In order
to solve this problem, re-position the programme selector on its
original position.
Selecting the spinning speed
When selecting the programme or in Pause mode, the light
corresponding to the maximum spinning speed illuminates. You can
adjust the spinning speed which corresponds to the type of laundry
and the degree of dampness required at the end of the wash
depending on your drying possibilities. You can also choose the RINSE
HOLD option. If you do not modify the spinning speed, the final
spinning is automatically adapted to the chosen programme. The
middle spinning speed depends on the chosen programme and can
not be modified.
Selecting the pushbuttons
Selecting if necessary one or several additionnal programme
pushbuttons
• to change the selection, press an another pushbutton.
• to cancel a wrong selection, press again the same pushbutton.
Selecting, if necessary, a delay start
Before starting the programme, if you want to delay it, press the
DELAY START pushbutton until the choisen led is lighted on.
Starting the programme
1. Open water inlet tap.
2. Start the washing programme : press the START/PAUSE button.
The programme starts if a delay start has not been selecting. The
water comes into the drum from 15 to 20 seconds after pressing the
START/PAUSE button.
If a delay start has been selected, the appliance starts the timer but
you can still load some laundry, modify the delay start or cancel it.