AEG 4520 Washer User Manual


 
User information
31
Unpacking
Packing used to protect internal parts of the washing
machine during transport must be removed before the
washing machine is put into service for the first time.
Remove all packing from the washing
machine. Tilt the washing machine sideways
and then remove the packing under the
motor, and straighten the washing machine.
Tilt the washing machine back-wards, rotate it
by a quarter of a turn on one of its corner to
remove the transport base.
Open the washing machine lid and remove the
immobilization packing and plastic films.
Close the lid.
Use a 10 mm spanner to remove the two
screws and spacers at the back.