36
Loading ActiveX From:
This field is used to specify the location of Xplug Control
(ActiveX) plug-in program. Enter the information as required
in .ocx format, for example:
http://www.<your company>.com/xplug.ocx, where <your
company> must be replaced with your company’s DNS server.
Or it can be installed from the CD come with the internet camera.
Open Second Port:
The Web Server field allows settings to open a second port for the
Wireless Internet Camera. This will permit users IP Sharing
Gateways to support multiple Wireless Internet Cameras. By
default, Port 80 is always opened for the Wireless Internet
Camera Web Server access. Select “Yes” and input the second
port value.
For example: If you have 5 Internet Camera to be installed, each
with an IP address from
192.168.0.101
192.168.0.102
192.168.0.103
192.168.0.104
192.168.0.105
You can open the second port for each Internet Camera from port
81 to Port 85 as illustrated below:
Internet Camera 1 – IP 192.168.0.101, second web port 81
Internet Camera 2 – IP 192.168.0.102, second web port 82
Internet Camera 3 – IP 192.168.0.103, second web port 83
Internet Camera 4 – IP 192.168.0.104, second web port 84
Internet Camera 5 – IP 192.168.0.105, second web port 85
37
You also need to setup your DSL gateway for Port Mapping.
Port 81 map to 192.168.0.101
Port 82 map to 192.168.0.102
Port 83 map to 192.168.0.103
Port 84 map to 192.168.0.104
Port 85 map to 192.168.0.105
The Transfer Image field allows settings to open a second port for
the Wireless Internet Camera to transfer images. The default Port
8481 is open image transfer and you can define a second port
similar to the above.
Save/Cancel:
After making sure all settings in the System are correct, click the
“Save” button to store the settings for the Wireless Internet
Camera. You can alternatively click the “Cancel” button to
restore all settings to the values last saved to or retrieved from the
Wireless Internet Camera.
