20
6
HARDWARE
INSTALLATION
This section describes the Hardware installation procedure for the
Wireless Internet Camera.
1 Attach Wireless Antenna
From the rear panel of the Wireless
Internet Camera, screw the external
Antenna that came with the Wireless
Internet Camera into the antenna
connector.
21
2 Connect an Ethernet cable
Connect an Ethernet cable to the
network cable connector located
on the Wireless Internet Camera’s
rear panel, and then attach it to
the network.
3 Attach the external power supply
Attach the external power
supply to the DC power input
connector located on Wireless
Internet Camera’s rear panel,
and then connect it to your local
power supply.
Note:
Confirm power source is supplied
from the LED indicators label Power
on the Wireless Internet Camera is
illuminated.
