
61
Information
TheWARNINGindicatorshowsthestateofthefunctionwhichprotectstheprojector.Checkthestateofthe
WARNINGindicatorandthePOWERindicatortotakepropermaintenance.
WARNING indicator
The projector is shut down and the WARNING
indicator is blinking red.
When the temperature inside the projector reaches a
certainlevel,theprojectorwillbeautomaticallyshutdownto
protecttheinsideoftheprojector.ThePOWERindicatoris
blinkingwhiletheprojectorisbeingcooleddown.Whenthe
projectorhascooleddownenough(toitsnormaloperating
temperature), it can be turned on again by pressing the
POWERON/STAND-BYbutton.
The projector is shut down and the WARNING
indicator lights red.
When the projector detects an abnormal condition, it is
automaticallyshutdowntoprotecttheinsideoftheprojector
andtheWARNINGindicatorlightsred.Inthiscase,unplug
theAC power cord and reconnect it, and then turn the
projectorononceagaintoverifyoperation.Iftheprojector
cannotbeturnedonandtheWARNINGindicatorstilllights
red, unplug theAC power cord and contact the service
station.
CAUTION
DONOTLEAVETHEPROJECTORWITHTHE
ACPOWERCORDCONNECTEDUNDERAN
ABNORMALCONDITION.ITMAYRESULTIN
FIREORELECTRICSHOCK.
Maintenance and Cleaning
Top Control
Top Control
Note:
TheWARNINGindicatorcontinuestoblinkevenafterthe
temperatureinsidetheprojectorreturnstonormal.When
theprojectoristurnedonagain,theWARNINGindicator
stopsblinking.
Then check the matters below:
–Didyouprovideappropriatespacefortheprojectortobe
ventilated?Checktheinstallingconditiontoseeiftheair
ventsoftheprojectorarenotblocked.
–HastheprojectorbeeninstallednearanAir-Conditioning/
Heating Duct or Vent? Move the installation of the
projectorawayfromtheductorvent.
–Arethefiltersclean?Cleanthefiltersperiodically.
WARNING emit a
redlight
WARNINGblinkingred