A SERVICE OF

logo

Open as PDF
next previous
32
Computer Input
AutoPCAdjustmentfunctionisprovidedtoautomaticallyadjustFine sync.,Total dots,Horizontal ,Vertical,
Clamp,Display area H andDisplay area V positionstoconformtoyourcomputer.
UsePoint▲▼buttonstoselectAuto
PC Adj.andpresstheSELECTbutton.
Please wait...appearswhiletheAutoPC
adjustmentisinprocess.
PC Adjust Menu
Auto PC Adjustment
To store adjustment parameters
TheadjustedparametersfromtheAutoPCAdjustmentcan
bestoredintheprojector.Oncetheparametersarestored,
thesetting canbe donejust byselectinga Mode (1–5) in
the PCSystemMenu(see page31).Seealso"Store"on
page34.
Note:
•Fine sync., Total dots, Horizontal and Vertical
position of somecomputers cannotbefully adjusted
withtheAutoPCAdjustmentfunction.Whentheimage
is not provided properly with this operation, manual
adjustmentsarerequired(pp.33-34).
•TheAutoPCAdjustmentcannotbeoperatedwhen480i,
575i, 480p, 575p, 720p,1035ior1080iisselectedinthe
PC SystemMenu(p.31)orwhen thesignaliscoming
fromtheDVI-terminal.
PresstheMENUbuttontodisplaytheOn-Screen
Menu.UsethePoint▲▼buttonstoselectPC Adjust
andthenpressthePoint►button.
1
2
UsethePoint▲▼buttonstoselectAuto PC Adj.and
thenpresstheSELECTbutton.
Auto PC Adj.
Menu Operation
Computer Input