Sanyo PLC-XU305K Manual

A SERVICE OF

next previous

19

Installation

Connecting the AC Power Cord

Thisprojectorusesnominalinputvoltagesof100-120 Vor

200–240VACanditautomaticallyselectsthecorrectinput

voltage. It is designed to work with single-phase power

systems having a grounded neutral conductor.Toreduce

theriskofelectricalshock,donotplugintoanyothertypeof

powersystem.

If you are not sure of the type of power being supplied,

consultyourauthorizeddealerorservicestation.

Connect theprojectorwithallperipheralequipmentbefore

turningtheprojectoron.

Note:

UnplugtheACpowercordwhentheprojectorisnot

inuse.Whenthisprojectorisconnectedtoanoutlet

withtheACpowercord,itisinStand-bymodeand

consumesalittleelectricpower.

Connect theAC power cord (supplied) to the

projector.

TotheACoutlet.

(200 - 240 V AC)

NOTE ON THE POWER CORD

ACpowercordmustmeetrequirementofthecountrywhereyouusetheprojector.

ConfirmtheACplugtypewiththechartbelowandproperACpowercordmustbeused.

IfsuppliedACpowercorddoesnotmatchyourACoutlet,contactyoursalesdealer.

Topowercord

connectoronyour

projector.

Projector side

AC outlet side

Ground

TotheACoutlet.

(120 V AC)

For the U.S.A. and Canada

TotheACoutlet.

(200 - 240 V AC)

For the U.K.For Continental Europe



CAUTION

TheACoutletmustbenearthisequipmentandmustbe

easilyaccessible.