2. Slide both sides of the paper guide outward, and then load paper print side up until it
stops.
3. Adjust both sides of the paper guide to match the paper width.
• When using the bypass tray, it is recommended that you set the paper direction to .
• When loading thick paper or OHP transparencies, specify the paper size and the paper type.
• Letterhead paper must be loaded in a specific orientation. For details, see page 87 "Loading
Orientation-fixed Paper or Two-sided Paper".
• You can load envelopes into the bypass tray. For details about loading envelopes, see "Loading
Envelopes", Paper Specifications and Adding Paper .
• When copying from the bypass tray, see "Copying from the Bypass Tray", Copy . When printing
from a computer, see page 85 "Printing from the Bypass Tray Using the Printer Function".
• When the [Panel Key Sound] is turned off, it does not sound if you load paper into the bypass tray.
For details about [Panel Key Sound], see "System Settings", Connecting the Machine/ System
Settings .
8. Adding Paper and Toner
84
