Omnia 6 Use and Installation Guide – Version 1.00a
33
33
System
This submenu allows you to perform
housekeeping on the Omnia-6
operating system. Many items on
this menu are available only to those
having Level 3 security access.
There are thirteen parameters or
selections: About, Change Password,
Lock Unit, Load Defaults, Load
from Card, Save to Card, Network,
Security Config, Current Time,
Current Date, Port Baud, Security
Level and Backlight.
System Submenu
Port Baud
This option sets the rear panel RS-232 communications port parameters between 9,600 baud, 19,200 baud
and 57,600 baud. The factory default is 19,200 baud.
Security Lev(el)
It is advisable for the user interface to be password-protected for controlled access. There are three levels of
password protection:
In levels 1 and 2, the visibility of each submenu (except System) can be set in the Security Config screen in
the System Menu.
Level 1, User, allows access only to the Menus selected in the Security Config window, parts of the System
Menu and the headphone level control. The default password for this level is “user” (all lower case).
Level 2, Advanced User, allows access only to the Menus selected in the Security Config window, parts of
the System Menu and the headphone level control. The default password for this level is “advuser” (all
lower case).
Level 3, Master or Engineer level, allows access to all submenus. The default password for this level is
“engineer” (all lower case).
There is also a "Stealth Mode" option available, which when selected, suppressed the gain reduction
metering and the current Preset Name when the Omnia6-fm has been locked. The I/O metering continues to
function normally, and the currently running Preset Name is replaced by the text "System is Locked".
It is advisable to change the passwords once the Omnia-6fm is installed. Passwords are case sensitive and
can contain up to ten characters.
