50 Faxing: Advanced Operations
Relay Group Numbers: These 2-digit numbers are the num-
bers of groups of locations programmed into the relay
key station.
Relay Key Station
The relay key station is the
Oki fax-capable unit
which receives the original fax message and then auto-
matically relays or broadcasts the message to other re-
mote fax machines.
For this feature to be available, the relay key station
must be an OKIFAX 2600.
Relay Broadcast Report
After the relay broadcast is completed, it is possible for
the relay key station to send a fax back to your
OKIFAX confirming the success of the relay broadcast.
For this function to work, your OKIFAX’s own tele-
phone number must be programmed into its last Auto
Dial number:
Ⅲ OKIFAX 5300 Plus: Auto Dial number 64
Ⅲ OKIFAX 5600 Plus: Auto Dial
number 99
Be sure to program the number in the format the
relay key station uses for dialing, including access
digit, if any, etc.
Initiating a Relay Broadcast
1 Load your documents.
2 Press the Select Function key.
3 Press the 4/Relay Initiate TX One Touch key.
a.) The first time you use this feature, the display
shows:
RELAY PASSWORD
ENTER [ ]
- Using the numeric keypad, enter the 4-digit relay
password.
b.) If you have already used this feature, the display
shows:
RELAY PASSWORD [XXXX]
where XXXX is the last password you used.
- If the password is correct, go to step 4.
- If you want to use a different password, press the No
ᮣ
key, then use the numeric keypad to enter the
password for the relay key station you want to use.
4 Press the Yes ᮤ key.
a.) The first time you use this feature, the display
reads:
REMOTE LIST NO. [ ]
ENTER 01-99
- Using the numerical keypad, enter the 2-digit relay
group number for the group you want to fax to.
b.) If you have already used this feature, the display
shows:
REMOTE LIST NO. [XX]
