DVD Setup Menu6
52
HDMI
This setting is used when the unit is con-
nected by HDMI or DVI with a TV or projec-
tor.
This setting is enabled only when the HDMI
option of the FL menu is On. (page 32)
Press ENTER
1 Select
ResolutionResolution
ResolutionResolution
Resolution
• VGA <640 X 480>
•480p/576p (525p/625p)
•720p (750p)
•1080i (1125i)
Select one of the above with the cursor buttons
(5/∞) and then press the ENTER button.
Note
• The resolutions available for HDMI outputs
depend on the connected TV or projector. For
details, see the user’s manual of your TV or
projector.
•If, after changing the resolution, images are not
displayed properly on the TV or projector, press
and hold the MENU button for two seconds to
bring up the FL menu. Then set HDMI RESET
to reset. (page 32)
•VGA can be outputed only when TV System is
set to NTSC.
•When the resolution changes, the image may be
corrupted or the output may take longer than
normal.
2 Select
FormatFormat
FormatFormat
Format
•RGB-Normal
•RGB-Expand
•YCbCr-1 (4:4:4)
•YCbCr-2 (4:2:2)
Select one of the above with the cursor buttons
(5/∞) and then press the ENTER button.
Note
• Image data values in RGB-Normal format range
between 16 (black) and 235 (white).
• Image data values in RGB-Expand format range
between 0 (black) and 246 (white).
• The formats available for HDMI outputs depend
on the connected TV or projector. For details,
see the user’s manual of your TV or projector.
• Only RGB-Normal and RGB-Expand can be
selected for DVI outputs.
•When black rise to the surface depending on
the display, black Setup in the Video Adjust-
ment set to OIRE.
