Playing Discs5
30
Creating your own setting
1Press the VIDEO ADJ. button on the re-
mote control.
2 Select
SetupSetup
SetupSetup
Setup.
3Use the cursor buttons
(
2
/
3
)
to select a
Memory (Memo1, 2, 3) to change/store a
picture quality parameter.
4Use the cursor buttons
(
5
/
∞
)
to select a
picture quality parameter, then use the
cursor buttons
(
2
/
3
)
to adjust that
parameter.
• Progressive Motion – When using progressive
scan, this adjusts the motion and still picture
quality. There are two modes: Auto and Video.
In Auto mode, the player automatically distin-
guishes film-source material and video-source
material. Set to the Video mode when you know
the program you are watching is from video-
source material (such as animations).
Auto 1: Standard setting
Auto 2: Setting for moving images
Auto 3: Setting for still images
Video 1: Standard setting
Video 2: Setting for moving images
Video 3: Setting for still images
• DNR – Adjusts the amount of noise reduction
(NR) applied to the Y (brightness) component
• CNR – Adjusts the amount of noise reduction
(NR) applied to the C (color) component
Video Adjust
You can set the picture settings you desire and
store them in the player’s memory.
Selecting a preset
1Press the VIDEO ADJ. button on the re-
mote control.
2 Select
Memory SelectMemory Select
Memory SelectMemory Select
Memory Select.
3 Select a preset.
Press ENTER
• Standard – optimized settings for a standard
television set
• Memo 1, 2, 3 – User presets (see below for
more on these)
You can highlight a preset while a disc is playing
(before you press ENTER to select it) to see the
effect on the picture immediately.
Note
Depending on the disc and your TV/monitor, the
effect of these settings may not be clear.
