Desktop Docking Cradle 5
E-EQ-MX6DKRG-D-ARC MX6 Cradle Reference Guide
Secured Cradle
Wall Mounting
Equipment needed (not supplied by LXE): Hardware required to bolt cradle to the mounting plate
and hardware required to bolt cradle to a vertical surface.
1. Turn the cradle over so the bottom of the unit is visible.
2. Secure three screws to the bottom of the unit by sliding them into the available keyhole slots.
3. Match the holes in the bracket to the secured screws in the cradle.
4. Attach the cradle’s bottom panel to the mounting bracket using the appropriate washers and
bolts.
5. Turn the secured cradle right side up.
6. Locate the mounting holes in the vertical panel.
7. Secure the vertical mounting bracket to the wall.
8. Carefully test the stability of the cradle mounted to the wall bracket.
9. Connect the serial and/or power cables at this time.
10. Connect the AC power cable to an uninterruptible external power source.
11. The desktop cradle is now ready for use.
DIN Rail
The desktop cradle has a DIN rail (7.5 x 35 mm) slot in the bottom of the cradle to allow for
secure horizontal attachment.
LXE does not supply the DIN rail or the mechanical hardware required to mount the desktop
cradle using a DIN rail.
