Vehicle Mount Cradle 11
E-EQ-MX6DKRG-D-ARC MX6 Cradle Reference Guide
Components
1 Latch
2 Locking tabs
3 Spring Arm Assembly
4 RAM™ Ball
5 Turnscrew
6 Mounting Bracket
Figure 5 Vehicle Mount Cradle – Back
The MX6 is inserted into the cradle by placing the base of the unit in the charging/communication
pocket and then firmly pressing the unit backwards until the latch clicks.
The MX6 is removed from the cradle by pressing either locking tab up, then pulling the MX6
forward and out of the charging/communication pocket.
Either locking tab can be used to release the MX6 from the latches.
Indicators and LEDs
Label Color Explanation
DOCK Solid Green MX6 is properly seated in the charging bay, and
external power source is connected and the Main
Battery in the MX6 is automatically charging.
Red Serial data is being sent to the MX6 from the host.
Green Serial data is being sent from the MX6 to the host.
COMM w/serial port
Orange Serial data is being sent at high data rates.
Note: IrDA transmission from a handheld MX6 to or from a docked MX6 does not require a
powered cradle.
See Also: MX6 (or MX6 PPC) Reference Guide, Chapter 4 – System Configuration,
Sections titled “ActiveSync”, “Infrared Receive” and “Beam”.
See Also: “Accessories” for LXE certified cables.
