E-EQ-MX6DKRG-D-ARC MX6 Cradle Reference Guide
MX6 Cradles
Introduction
MX6 docking cradles give the MX6 the ability to communicate with a host computer and other
devices.
In addition, using external power sources, both cradles charge the Main Battery and the backup
battery in the MX6. The desktop docking cradle can charge a spare main battery as well.
The MX6 can be either On or in Suspend mode while in the cradles.
The docking cradles accept all MX6 mobile device versions, with and without handles or
handstraps.
Desktop Cradle
Vehicle Mount Cradle with
Tethered Scanner
Docking and Undocking
If the cradle is not permanently attached to the work or vehicle surface, before inserting or
removing the MX6, stabilize the cradle with one hand while inserting or removing the MX6 with
the other hand.
The MX6 is inserted into the charging pocket with the keypad facing forward.
Press down until the pins in the charging bay connect with the port in the base of the MX6. The
MX6 is held securely in the cradle.
Remove the MX6 from the cradle by pulling it straight up and out of the charging pocket.
