A SERVICE OF

logo

1-24 Data Entry
MX3-CE Reference Guide E-EQ-MX3CERG-A-ARC
Scanner Entry
Read all cautions, warnings and labels before using the laser
scanner.
To scan with the laser barcode reader, point the laser window towards a barcode and press the
Scan button. A red laser beam strikes the barcode. Align the red beam so that the barcode is
centered within the beam.
The laser beam must cross the entire barcode. Move the MX3-CE towards or away from the
barcode so that the barcode takes up approximately two-thirds the width of the beam. The SCNR
LED turns red when the laser beam is on. Following a good read, the LED turns green, indicating a
successful scan.
Beeps may be heard after a good read, depending on the application running on the MX3-CE. The
laser and SCNR LED automatically turn off after a successful or unsuccessful read. The scanner is
ready to scan again when the Scan key is pressed.