6-60 Scanner Parameters
MX3-CE Reference Guide E-EQ-MX3CERG-A-ARC
Trigger Mode
Note: The MX3-CE is designed to be operated in Level Trigger Mode. LXE recommends
leaving this value unchanged.
Parameter Default Value: Level
Use this parameter to determine when the laser is activated and decoding begins, how long the
laser remains on and what determines the cessation of the laser scan and decode process.
Select a trigger mode by scanning the appropriate barcode. If you wish to change your selection,
scan Cancel.
Level A SCAN button press activates the laser and decode processing.
The laser remains on and decode processing continues until a
SCAN button release, a valid decode or the Laser On Time-out is
reached.
Level
Pulse A SCAN button press activates the laser and decode processing.
The laser remains on and decode processing continues until a
valid decode, or the Laser On Time-out is reached.
Pulse
Continuous The laser is always on and decoding.
Continuous
See Also Time-out Between Same Symbol
Blinking This mode is used for trigger less scanning operations. Scanning
range is reduced in this mode. This mode cannot be used with
scanners that support an aim mode.
Blinking
