A SERVICE OF

logo

Open as PDF
next previous
Power On and Off 31
E-EQ-MX3OGWW-F-ARC MX3 User’s Guide
Power On and Off
Turn On the MX3
Press the Power button until the display turns on. The power button is located above the ESC key
on the keypad.
Figure 34 Location of the Power Button
When the MX3 is powered on, the display will begin scrolling power-on information as software
and drivers are loaded. When a DOS C: prompt is displayed or an application begins, the power
on sequence is complete.
Turn Off the MX3
Hold the Power button down. The unit will emit three short beeps and one long beep. After the
long beep the MX3 will power down. The Power button and the display will turn off. The Power
key function is configured in the BIOS Setup (See the “MX3 Reference Guide”.)
Note: Quickly tapping the Power button will place the MX3 in Suspend mode.