18 Cradles
MX3 User’s Guide E-EQ-MX3OGWW-F-ARC
Cradles
There are two types of cradles: a desktop cradle for table top charging/communication
applications and a vehicle mount cradle for vehicle mounted charging/communication
applications.
The cradles give the MX3 the ability to communicate with a host computer and other equipment.
In addition, using wall AC adapters or DC/DC converters, the cradle transfers power to the
internal charging circuitry of the MX3 and, in turn, the MX3 recharges the Main Battery.
The MX3 can be either on or off while in the cradle. The MX3 can be inserted and removed from
the cradle with one hand.
Cables are available from LXE for connecting the cradle to a printer, a personal computer or a
barcode printer. Tethered scanners (for RS-232 cradle connection) are also available from LXE.
Note: The “MX3 Cradle Reference Guide” contains cradle installation and technical
information.
Desktop Cradle
Figure 20 MX3 in the Desktop Cradle
How To:
Lower the MX3 straight into the cradle, tilt it forwards and then let it rest backwards into the
cradle. Ensure that the MX3 is properly seated on the charging contacts. The CHGR LED will
illuminate green when the MX3 is correctly seated in the cradle. The CHGR LED will illuminate
red when the MX3 main battery is being charged (in a cradle connected to an external power
source).
To remove the MX3, tilt the MX3 forward and lift it straight up out of the cradle.
Note: Do not "slam" or slide the MX3 sideways into the cradle. Damage may result.
