2 Scanner Warnings and Labels
MX3 User’s Guide E-EQ-MX3OGWW-F-ARC
Scanner Warnings and Labels
• Do not look into the laser’s lens.
• Do not stare directly into the laser beam.
• Do not remove the laser caution labels from the MX3.
• Do not connect the laser barcode window to any other device. The laser barcode
window is certified for use with the MX3 only.
Caution:
!
Laser radiation when open. Please read the caution labels.
Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Figure 1 CDRH / IEC 825 Caution Label Location -
MX3, Back
Figure 2 Caution Label - Scanner
Cleaning the Scan Aperture
Keep fingers and rough or sharp objects away from the scan aperture and display. If the glass
becomes soiled or smudged, clean only with a standard household cleaner such as Windex®
without vinegar or use Isopropyl Alcohol. Do not use paper towels or harsh-chemical-based
cleaning fluids since they may result in damage to the glass surface. Use a clean, damp, lint-free
cloth. Do not scrub optical surfaces. If possible, clean only those areas which are soiled.
Lint/particulates can be removed with clean, filtered canned air.
