Computer Interface
ADVANCED OPERATION GUIDE 4-11
With Windows 95/98/Me, make settings as follows:
1
Click on the Start button in the Windows 95/98/Me task bar and align the
cursor with Settings, then click on Control Panel from among the items
displayed.
2
The Control Panel window opens. Double click on System.
3
System Properties window opens. Click on the Device Manager tab,
then double click on Ports (COM & LPT).
4
Double click on Communications Port.
5
The Communications Port Properties dialog is displayed for the
selected COM port. Click on the Port Settings tab and set the port
properties.
6
After setting the properties, click the OK button.
The software settings made using the above procedures are temporary.
On most computers, permanent settings must be made with DIP switches.
