15.0 Engine Recorder
Overview
The Engine Recorder records three types of engine-sensor and calculated-output
data over the life of the vehicle, between reset and defined durations. Each type of
data record is stored independently and depending on the type, multiple records
might be stored. The records for the three recorders are retrievable with the DAVIE
service tool.
Standard Feature
Chart Recorder
Trip Recorder
Snapshot Recorder
Faststop Recorder
The Chart Recorder allows the engine to store data over the life of the vehicle.
The Trip Recorder allows the engine to store data between resets. When the trip
reset is triggered, the record is discarded and new data is collected.
The Snapshot Recorder allows the operator to trigger a recording event. Details on
triggering the Snapshot Recorder are available in Engine RAPIDO. The Snapshot
Recorder will record data 10 seconds before and 5 seconds after the trigger. Three
Snapshot Recorder events will be stored.
Faststop Recorder allows the engine to trigger a recording event when vehicle
deceleration is greater than “Deceleration Rate to Trigger Faststop Recorder
(N064).” The Faststop Recorder will record data 5 seconds before and 5 seconds
after the trigger. Three Faststop Recorder events will be stored.
Feature Options
Without Faststop Recorder
The default setting for the Faststop recorder is “enabled”. Customers may disable
the Faststop recorder at the time of production by selecting the appropriate sales
code.
Orderable Feature & Options
Fast Stop Recorder Disable
