Features & Benefits
Small, elegant design
Super-easy setup
Rechargeable battery included
Discreet On and Off buttons for 1 Scene
Can be reconfigured for 2 Scene triggers or 2 Scene On/Off toggle control
Can be installed into a single Decora opening (requires Wall-Mount Bracket)
Can be used as a table-top controller (requires Tabletop Stand)
Can be used as a visor-mounted remote control for lights, garage door opener etc. (requires Visor Clip)
LED blinks green when Turning a Scene On and red when turning a Scene Off
Slide switch for disabling buttons (“vacation” or “pocket” mode)
Stuck Button Mode – saves battery life by going to sleep if button stuck down
Beeper for setup ease
Recharges with standard USB charger with via Micro-USB Plug (5VDC)
Battery life exceeds 3 months
Battery charge LED indicator built-in
Low battery transmit warning (use with software to trigger email/text message)
All settings stored in stable memory which is maintained even without power
1 year warranty
What’s in the Box?
RemoteLinc 2
Rechargeable battery (pre-installed)
Quick-Start Guide
Required Accessories
A micro USB cable for connecting and recharging RemoteLinc 2 via USB
port on a computer or USB power adapter.
If the INSTEON device you intend to control does not receive RF signals
(i.e., power line only), you will need at least one dual-band INSTEON
device to convert the RF signals to power line signals.
Type A to Micro-B cable
(2444B5)
Page 4 of 15 2444A3 Rev: 10/24/2011 10:43 AM
