I
-
I
-
Spectrum Analyzer Mode Key Descriptions
Spectrum Analyzer Mode Functions
CLEAR
WRITE
C
erases any data previously stored in trace C and
continuously displays any signals detected during the sweep
of the analvzer. This function is activated at power on and
by pressing
(jj).
Changing the trace mode of trace C to clear write or
minimum hold can change the trace mode of trace A and
trace B. If trace A or trace B is in clear-write mode or
maximum-hold mode when trace C is changed to clear write
or minimum hold, the trace mode of trace A or trace B is
changed to store blank. The following table shows the trace
mode of trace A or trace B before and after changing trace C
to clear-write or minimum-hold trace mode.
If you want to use trace A or trace B in the clear-write or
maximum-hold mode and do not want trace C to blank it,
use minimumhold or view-trace mode for trace C.
Front-Panel Key Access
Cm)
6-42
