XTP PI 400 Power Injector • Reference Information 8
Reference
Information
Mounting
The XTP PI 400 is 1U high and one half rack wide.
ATTENTION:
• The XTP PI 400 is not suitable for use in air handling spaces or in wall cavities. The
power supply must be located within the vicinity of the Extron AV equipment in an
ordinary location with pollution degree 2, and secured to an equipment rack within
a dedicated closet, podium, or desk.
The installation must be in accordance with the applicable provisions of National
Electrical Code ANSI/NFPA 70, article 75 and Canadian Electrical Code part 1,
section 16. The power supply must not be permanently fixed to building or similar
structure.
• This device is for intra-building use only.
1. Turn off or disconnect all equipment power sources.
2. Mount the XTP PI 400 on a table, on a rack shelf, or under a desk using an optional
mounting kit.
WARNING: Risk of electrical shock. To reduce the risk of fire or electric shock, do
not expose this apparatus to rain, moisture, dripping, splashing, or objects filled with
liquids.
Tabletop Mounting
Attach the provided rubber feet to the bottom four corners of the enclosure.
Under-the-table Mounting
Use an optional Extron mounting kit to mount the XTP PI 400 under a desk or table. Follow
the instructions included with the kit.
