Adjusting the Flash Output
107
In D mode, you can choose 3 levels of flash output.
Set the mode dial to D.
Choose the level of flash output.
● After pressing the r button, immediately
turn the Ï ring and select the level of
output, then press the m button.
XOnce set, ~ will appear on the screen.
• You can also set the flash exposure compensation. Press the n
button and choose [Flash Settings] in the 4 tab. Then choose [Flash
Exp. Comp] and press the qr buttons to choose a setting.
• If you press the r button and immediately press the n button, the
setting screen will appear.
Adjusting the Flash Output
• You can also set the flash output level. Press the n button and
choose [Flash Settings] in the 4 tab. Then choose [Flash Output] and
press the qr buttons to choose a setting.
• In M and B modes, you can set the flash output if you press the
n button and choose the 4 tab, then [Flash Settings] and set the
[Flash Mode] option to [Manual].
• If you press the r button and immediately press the n button, the
setting screen in will appear.
