A SERVICE OF

logo

Microplate Luminometer Raw Data
58
[EXCEL (TM)] tab
Create an EXCEL macro for control of a measurement proce-
dure by making the necessary entries here. Prerequisite is that
EXCEL 7.0 is installed on your PC and running (Figure 5-5).
[Auto-send to...] Upon completion of the measurement, the
Excel macro is automatically sent to the
Excel program and executed there.
[Workbook] Selection of workbook. Click on <...> to dis-
play the browser. The subdirectory Sim-
plicity\workbook is defaulted.
[At cell] The measured data are read starting at this
cell of the Excel spreadsheets.
[Excel(TM) macro] Entry of an Excel macro.
Figure 5-5:
[EXCEL (TM)] tab