Microplate Luminometer Installation and Commissioning
19
3. Installation and Commissioning
3.1 Overview
Proceed as follows to prepare your first measurement:
Step Section Page
Unpack and set up the instrument 3.4 20
Remove transport safety screw 3.5 21
Check operating and main voltage 3.5 21
Connect luminometer to main and power it on 3.5 21
Connect luminometer to PC 3.5 22
Check microplate transport unit manually 3.5 22
Connect injector unit 3.6 23
Connect injector tubings to pumps 3.6 23
Connect reagent bottles to pumps 24
Connect MONOLIGHT 3096 and in
ector unit
using a data cable
3.6 25
Check operating and main voltage 3.6 25
Connect injector unit to main and turn it on 3.6 25
Install Simplicity (PC) 3.7 26
Start Simplicity (PC) 3.8 28
Define interface in Simplicity (PC) 3.9 29
Register software 3.10 32
First measurement: 3.11 34
Enter parameters 3.11 34
Start measurement 3.11 36
