Barker Sales & Service Department
IMPORTANT INFORMATION!
FOR PROMPT SERVICE WHEN CONTACTING THE FACTORY FOR SUPPORT, BE SURE TO HAVE CASE MODEL AND SERIAL
NUMBER HANDY.
(THIS INFORMATION IS LOCATED ON THE DATA TAG ATTACHED TO THE CASE. SEE BELOW FOR DATA TAG LOCATIONS)
For any warranty or service issues not covered by this manual, for tech support, or for warranty service calls, please
contact the Barker Service Manager in your area.
Jody Jones - Eastern Service Manager: (319) 293-8308
• Connecticut • Delaware • Florida
• Georgia • Maine • Maryland
• Massachusetts • New Hampshire • New Jersey
• New York (Eastern) • North Carolina • Pennsylvania (Eastern)
• Rhode Island • South Carolina • Vermont
• Virginia
Bill Connor - Midwestern Service Manager: (319) 293-8307
• Alabama • Arkansas • Indiana
• Iowa • Kansas • Kentucky
• Louisiana • Michigan • Mississippi
• Missouri • Nebraska • New York (Western)
• Ohio • Oklahoma • Pennsylvania (Western)
• Tennessee • West Virginia
Gregg Rupe - 2nd Midwestern Service Manager: (319) 293-8324
• Alaska • CANADA • EUROPE
• Hawaii • Illinois • MEXICO
• Minnesota • North Dakota • South Dakota
• Texas • Wisconsin
Gary Winslow - Western Service Manager: (319) 293-8306
• Arizona • California • Colorado
• Idaho • Montana • Nevada
• New Mexico • Oregon • Utah
• Washington • Wyoming
Parts
Ordering Procedure
1. Contact the Service Parts Department
Melissa Marshall
703 Franklin Street
PO Box 478
Keosauqua, IA 52565
Tel: 319-293-8323
Fax: 319-293-8377
mmarshall@barkercomp
any.com
2. Provide the serial number of the case containing the part.
To locate the serial number look on the data tag located on the
customer left, outside back of the case, the customer left, inside
top of the case, or contact the factory for location.
3. If parts are to be returned for credit, contact the Parts
Department. Do not send parts without authorization.
BEFORE SERVICING
ALWAYS DISCONNECT ELECTRICAL
POWER AT THE MAIN DISCONNECT
WHEN SERVICNG OR REPLACING
ANY ELECTRICAL COMPONENT.
