Filter
Top Products
1
Programme selector dial
Turn the programme selector dial to the required programme. The selector
dial can be turned either clockwise or counter-clockwise. The green pilot
light of the button 9 starts flashing: the appliance is now switched on.
If you turn the programme selector dial to another programme when
the appliance is working, the red pilot light of the button 9 will flash
3 times and the message Err is displayed to indicate a wrong selection. The
appliance will not perform the new selected programme.
• To switch the appliance off , turn the programme selector dial to the
position
.
• To cancel or change a running programme, switch the appliance off by
turning the programme selector dial to the position
. Select the new
programme by turning the selector to the desired programme. Start the
new programme by pressing the button 9 again. The water in the tub
will be not emptied out.
2
Temperature button
Push the temperature button to select the most suitable temperature for
washing your laundry .
Cold : Cold wash.
3
Spin reduction
By selecting a programme, the appliance proposes automatically the max-
imum spin speed provided for that programme.
Press this button repeatedly to change the spin speed, if you want your
laundry to be spun at a different speed. The relevant light illuminates.
4
Rinse Hold
By pressing this button the corresponding pilot light illuminates.
By selecting this function the water of the last rinse is not emptied out to
prevent the fabrics from creasing. Before opening the door it will be nec-
essary to empty out the water.
To empty out the water, please read the paragraph «At the end of the pro-
gramme».
14